Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Remove Power-Mate ® cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section.
--'_
Push In
And Turn
2. Push in and turn
bulb counterclock-
wise, then pull out
to remove.
"---"_Pushlnl--
I
And Turn _
|
3. Push in and turn
bulb clockwise, to
replace.
Bulb must
not be higher than
15 Watts(130 Volts).
4. Reinstall Power-Mate ® cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section.
NOTE: See PARTS AND FEATURES
for
Bulb number.
IbWARNING
Electrical Shock Or Personal
Injury
Hazard
Disconnect
electrical supply before
performing
maintenance
to the
vacuum
cleaner.
Failure to do so could
result in electrical shock or personal
injury from vacuum
cleaner suddenly
starting.
TO CHECK BRUSHES
When brushes
__._
are worn to the
level of the base
support bars,
replace the
agitator
Base Support Bars
assembly.
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate ® cover, agitator
cover, belt and agitator assembly.
See "To
Remove Belt" in BELT CHANGING
AND
AGITATOR CLEANING.
2. Replace agitator assembly.
3. Reinstall belt, agitator cover and Power-
Mate ® cover. See "To replace belt" in BELT
CHANGING
AND AGITATOR
CLEANING.
17
Tabla de contenido
