Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO START
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position.
Personal injury or
damage could result.
, The cord moves rapidly when
rewinding.
Keep children away
and provide a clear path when
rewinding
the cord to prevent
personal injury°
,
DO NOT use outlets above
counters.
Damage from cord to
items in surrounding
area
coulldoccur.
Cord
Rewind
1. Pull cord out of
canister to desired
length, The cord
will not rewind until
the cord rewind
bar is pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner
has a polarized
plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way, If
the plug does not fit fully in the outlet,
reverse the plug_ If it still does not fit, con-
tact a qualified electrician
to install the prop-
er outlet, Do not change the plug in any
way.
2. Plug the polarized
power cord into a 120
Volt outlet located
near the floor
To rewind:
Unplug
the cleaner. Hold
the plug while
rewinding to pre-
vent damage or
injury from the
moving cord, Push
cord rewind bar.
Pile Height
Indicator
Handle
Pile Height Pedal
(some Models)
3. Lower wand from upright position by
pressing on the handle release pedal
cAuTioN
DO NOT leave the Power-Mate
®
running
in one spot in the upright
position
for any length
of time.
Damage to carpet may occur.
....
ul,
4. Select a pile height setting by pressing
the small pedal on the rear of the Power-
Matee.The pile height setting shows on the
indicator_ See SUGGESTED
PILE HEIGHT
SETTINGS,,
Attention:
Refer to your carpet manufac-
turers cleaning
recommendations°
Some
more delicate carpets may require that they
be vacuumed
with the Power-Mate e agitator
turned off, to prevent carpet damage.
_OFF
%.
FLOOR
_PET
5oSelect a switch
position on the
handle.
OFF
FLOOR - turns on the canister
motor only.
CARPET
- turns on both the canister
and
the Power-Mate ® motors.
NOTE - When this switch is in the FLOOR
position, the headlight
and dirt sensor
(some models) DO NOT function since no
electricity flows to the Power-Mate e,
Tabla de contenido
