Star 4H05A05001 Manual Del Usuario página 14

INSTALLATION
4. Add a well seal or pitless adaptor (sold
separately) to allow for the pipe to be
connected to house service. (Fig. 4)
4a. Pitless Adaptor Installation. Pitless adaptor
should be installed below the frost line,
and on the side of the well casing where
the supply line will run from well, in
accordance with the manufacturer's
instructions. (Fig. 4a)
NOTE: Pitless adaptor models vary according
to each application.
4b. Well Seal Installation: After the pump
assembly is lowered into the well, mount
the well seal onto the well casing and
tighten the four bolts in the well seal
evenly. (Fig. 4b)
14
Copyright © 2011 Star Water Systems. All rights reserved.
4
Well Seal
Installation
At Top of
Well Casing
4a
4b
Pitless
OR
Adaptor
Installation
Below
Frost Line
IL1148