Diagnostics - KENMORE ELITE PreView Grab-N-Go Manual De Uso Y Cuidado

Should you experience any problems with your
refrigerator, it has the capability of transmitting data via
your telephone to the Diagnostics Team. This gives you the
capability of speaking directly to our trained specialists.
The specialist records the data transmitted from your
machine and uses it to analyze the issue, providing a fast
ective diagnosis.
If you experience problems with your refrigerator, call
1-844-553-6667. Only use the Diagnostics feature when
instructed to do so by the Diagnostics Team agent. The
transmission sounds that you will hear are normal and
sound similar to a fax machine.
Diagnostics cannot be activated unless your refrigerator
is connected to power. If your refrigerator is unable to
turn on, then troubleshooting must be done without using

Diagnostics.

Using Diagnostics
First, call 1-844-553-6667. If the number of the phone you
you will be quickly relayed to a Diagnostics team agent.
Only use the Diagnostics feature when instructed to do so
by the Diagnostics Team agent.
1. Lock the display. To lock the display, press and hold
Open the right refrigerator door.
3. Hold the mouthpiece of your phone in front of the
speaker that is located on the right hinge of the
refrigerator door, when instructed to do so by the call
center.
4. Press and hold the Freezer Temp button for three
seconds while continuing to hold your phone to the
speaker.
5. After you hear three beeps, release the Freezer Temp
button.
Keep the phone in place until the tone transmission has
the countdown is over and the tones have stopped,
resume your conversation with the specialist, who will
then be able to assist you in using the information
transmitted for analysis.
- For best results, do not move the phone while the tones
are being transmitted.
- If the call center agent is not able to get an accurate
recording of the data, you may be asked to try again.
50