Oxygenics Fury RV Instrucciones De Instalación

F
™
ury
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape and
turn the existing flush out shower
shower head in a pipe for 5 to 10
counterclockwise seconds.
direction.
STEP 4 STEP 5
In a clockwise Attach other end
direction, screw of hose to base of
grooved end of handheld and hand
hose to the taped tighten.
portion of the
shower arm. Hand
tighten only.
USING THE
FLOW
CONTROL
Located on the
back of the shower
head, the flow control regulator eliminates
sudden blasts of water. Note: The flow control
is not a shut off valve. When turned to the
lowest position, the shower head continues
to flow. This is a normal safety feature. Unit
may be in lowest flow position during shipping.
Check the position of flow control upon
installation.
rV
STEP 3
Wrap plumber's
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STEP 6
Attach double
stick tape provided
to back of holder
and press firmly to
clean, dry shower
wall. Place your new
handheld shower
head into holder.
EASY TWIST
SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never been
easier. With the Fury's
easy twist design, simply
rotate the easy spray
selector for a quick
spray change.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 5.678 L/min
(1.5 gpm) or less.