hager G441-30X Manual De Instalación página 36

This summary shows the main steps to be followed to start the GSM telephone transmitter.
G
ΠProgramming steps required
I Step 1 - Opening:
A - Remove the 2 screw covers,
B - Unscrew the 2 screw,
C - Remove the cover.
I Step 2 - Power supply:
D - Insert the SIM card in the space provided
making sure it is the right way round,
E - Feed the transmitter:
- battery connection for models G450-30X and G470-30X,
- 12 V external power supply for model G442-30X
F - Connect rechargeable battery,
The display of the GSM
telephone transmitter shows:
I Step 3 - Programming steps required for all operating modes
Operation made
Language selection
for drop-down menu
Programming
the date and time
Entering the programming
menu
Programming
SIM pin code
and SIM PUK code
Programming
access code
For any additional programming, please refer to the installation manual.
Hello
Product code
Drop-down menu shown
Language
English
Programming
Language
Set up
Prog date/hour
DD MM YY hh mm
– – – – – – – – – –
Set up
Programming
Programming
SIM pin code
Old code
–
New code
–
Code check
–
SIM PUK code
–
SIM pin code
Please wait
SIM pin code
Programmed
Programming
SIM pin code
Programming
User code
Old code
–
New code
–
Code check
–
User code
OK
A
D
D
SIM card 12 V power supply socket
for the transformer provided
(no polarity to be respected)
Steps to be followed
• Select a language using the
Français / English / Espanol / Deutsch / Italiano / Nederlands
• Press (OK) to validate
• Press key (C) twice
• Press (OK) to validate
• Programme day, month, year and time
• Press (OK) to validate
• Press (OK) to validate
• Select SIM PIN code by using keys
• Press (OK) to validate
• Programme the PIN code (4 digits) of the SIM card
• Press (OK) to validate
• Programme a new 4-digit PIN code
• Press (OK) to validate
• Confirm the new 4-digit PIN code
• Press (OK) to validate
• Programme the 8-digit PUK code provided by your operator
or type default code 1 2 3 4 5 6 7 8
• Press (OK) to validate
The programming stage may take a while,
please wait until until this message is displayed
• Choose User code by using keys
• Press (OK) to validate
• Programme the old access code (9999 by factory default)
• Press (OK) to validate
• Programme a new code between 4 and 8 digits long
• Press (OK) to validate
• Confirm the new code (4 to 8 digits)
• Press (OK) to validate
36
B C
E F
E F
and keys among:
L M
L M
L M