Filter Maintenance - Triple S SSS Speedster 600H Manual Del Usuario

F I L T E R M A I N T E N A N C E
1. Check the Intercept Micro Filter EACH and EVERY time you
start and finish vacuuming. A clogged and dirty filter restricts
airflow, resulting in reduced suction, overheating and
possible damage to the vacuum.
2. While vacuuming throughout a building, stop every two
hours or as needed to check the Intercept Micro Filter.
Replace with a new Intercept Micro Filter when necessary
(Figure A)
NOTE: Lift both Intercept Micro Filter and cloth filters out
at the same time to avoid ripping the Intercept Micro Filter,
especially if it is full (Figure B).
Install a Intercept Micro Filter inside the cloth filter. To
install a Intercept Micro Filter on the SSS Speedster 600H
or SSS Speedster 1000H, slide the gasket of the Intercept
Micro Filter over the inlet on the inside of the top cap,
then replace the cap (Figure C).
3. Once a month (or more often if necessary) hand or
machine wash the cloth filter and let it LINE DRY.
(Do not put it in the dryer.)
4. For best results relace pleated dome filter every 6 months
(Figure D).
8
Figure A
Figure B
Figure C
Figure D
Owner's Manual