Diseqc1; Scan Satellite - Zodiac DZR-6FTA Manual De Instrucciones

DiSEqC 1.2
Figure 8
User can enable and change the settings of the DiSEqC1.2 motor.
The motor settings include:
Enable or Disable the DiSEqC1.2
Enable or Disable the software limits of the motor movement.
Recalculate Limits activates the default positions and limits of the motor, thereby the user set
previous values will be erased. Reset Position moves the motor to its default position(usually 0)

Scan Satellite

In this menu ,you can select the satellite by use the ▲▼ buttons, Press the OK buttons to confirm.
And use the ◄ ► buttons to select All or FTA. and OK buttons to scan satellite (Figure10,11);
Figure 10
Figure 9
Figure 11
39