Product Operation; Battery Charging - Amibot Pulse Manual De Usuario

Product Operation

Battery Charging

1. Charging station placement.
Place charging station against the wall
and remove obstacles about 1 meter at
two sides and about 2 meters in front
of The station, as show in the right
right side of the robot for more than 3 seconds.
a. Plug the adapter into the robot and the other end to the power socket as show in
b. Press
Note :
b. Once charging is completed, LED panel will show "FULL".
In order to extend battery's usage life :
e. If the robot is not used for more than 3 months, charge the robot for 12 hours
before use it for cleaning.
on robot or "HOME" on remote control to operate the robot to go
9