Control Panel - KLARSTEN 10034397 Manual Del Usuario

CONTROL PANEL

1
Insert plug into mains socket
Select the desired functions
Button Description
1 Thermostat
2
Flamme
3a O/I
3b
II
3c III
Safety cut-off
This appliance is fitted with a safety cut-off which will operate if the heater overheats
(e.g. Due to blocked air vents). For safety reasons, the heater will NOT automatically
reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect the supply to the mains and switch on the appliance.
3a 3b 3c
Function
Rotate thermostat knob (1) clockwise or anti-clockwise
to increase or decrease desired room temperature
setting.
Increase or decrease the flame effect by rotating the
flame adjustment switch (2).
Switches the appliance and the flame effect.
Switches on/off 900 heat output.
Switches on/off 1800 W heat output. .
(with switch 3b turned on)
2
EN
13