Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80412 REV 0
6. Installation
Unpack the equipment and visually check that the contents are in good conditions.
Keep the package for some days.
6.1 Location
Place the equipment on a flat level stable surface, suitable for the equipment
weight.
To work in a comfortable way, please leave a free space of 50cm around the
equipment and a minimum of 20cm at the rear part.
6.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the
connection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency
corresponds to the one indicated in the equipment characteristics plate.
Detail of trays and inner supports.
First time the equipment is started up or if it has been switched off for a
long period of time, it is necessary to leave the cabinet empty and con-
nected to the electrical network so that it can store enough cooling energy
for its normal work. This time must be at least 48 hours to ensure the full
energy load. After that time, the cabinet will be ready for use.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.grupo-selecta.com
03/2021
Page: 18
Tel 34 937 700 877 Fax 34 937 702 362
Tabla de contenido
