Fanimation The WindPointe FP7300 Manual Del Propietário página 9

Assembling and Mounting the Fan Blades and Switch Hsg (cont'd)
9a. Assemble the Adapter assembly on the Housing Support
bracket and tighten three screws. Securely attach the 9-pins
witch cup connector to wiring harness socket within Adapter
assembly. (Figure 6a)
9b. <<FP7500RSP4LK ONLY>>
connector from the switch cup housing light fitter to the
2-pin connector from the motor assembly. (Figure 6b)
10. Assemble the Housing Switch Cup onto the assembled
Adapter with three screws. (Figure 7)
11a. Restore Power and your fan is now wired to be turned
on and off from the fan pull chain speed control.
11b. <<FP7500RSP4LK ONLY>>
light kit assembly process.
Connect the 2-pin
Continue to the
9
Figure 6a
Figure 6b
FP7500RSP4LK
Figure 7