Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.8
Nameplate
See chapter 1.8 of the Installation and Operating Instructions 6006183 / 6005672.
2 - 3
Safety; Transport and storage
See chapter 2 - 3 of the Installation and Operating Instructions 6006183 / 6005672.
4
Product description
4.1
General description
See chapter 4.1 of the Installation and Operating Instructions 6006183 / 6005672.
4.2
Structural design RW 480
9
12
8
4
4.3
Operation with frequency inverters
See chapter 4.5 of the Installation and Operating Instructions 6006183 / 6005672.
5
Installation
See chapter 5 of the Installation and Operating Instructions 6006183 / 6005672.
5.1
Installation RW 480
See chapter 5.1 of the Installation and Operating Instructions 6006183 / 6005672.
5.2
Propeller assembly RW 480
The propeller fixing differs from all other units of RW/RCP and SB-KA series due to design. The propeller of the RW 480 is fixed with an
encapsulated clamping element.
1
4
6 7
2
5
3
Dismantling
•
Dismantle socket head screw (3/1) with lock washers (3/3), o-ring (3/4), propeller washer (3/2) and o-ring (3/5).
6
10
6
11
7
5
Figure 3 Propeller assembly / dismantling
2
1
3
Figure 2 RW 480
Legend
1
Bracket
2
Cable inlet
3
Connection chamber
4
Propeller shaft
5
Stator
6
Bracket with shackle
7
Motor housing
8
Mechanical seal
9
Propeller boss / Propeller
10
Gear
11
Shaft unit with rotor and bearings
12
SD - ring
Legend
1
Socket head screw
2
Propeller washer
3
Lock washers
4
O-ring (socket head screw)
5
O-ring (oropeller washer)
6
Clamping element
7
O-ring (boss)
EN 6184-E
Tabla de contenido
