La Crosse WS7014IT+ Manual De Instrucciones página 54

4.
The outdoor temperature data from the first transmitter (channel 1) should then be displayed on the
weather station. Also, the signal reception icon will be displayed. If this does not happen after 2
minutes, the batteries will need to be removed from both units and reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor temperature readings from the
first transmitter are displayed on the weather station.
Note : User shall insert the batteries into the second transmitter within 30 seconds after the weather
station displays the information of the first transmitter.
6. The outdoor temperature from the second transmitter and the "channel 2" icon should then be
displayed on the weather station. If this does not happen after 2 minutes, the batteries will need to be
removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the weather station. Then within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift to "3" once the third transmitter is
successfully received. If this does not happen, user shall restart the setting up from step 1.
Note : User shall insert the batteries into the third transmitter within 30 seconds after the weather
station displays the information of the first transmitter or immediately after reception of the second
transmitter is finished.
8. In order to ensure sufficient 868 MHz transmission however, the distance between the weather
station and the transmitter should not be more than 100 meters (see notes on "Positioning" and "868
MHz Reception").
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as described above.
Should transmission problems occur, it is necessary to remove the batteries from all units and start again
the set-up from step 1.
30