Programming Your Remote; Direct Code Entry - Jasco 34932 Instruction Manual

Programming Your Remote

Your remote is designed to control multiple audio/video
devices. To use, you will need to program the remote
for your devices. There are two different methods you
can use to program the remote, Direct Code Entry or
Auto Code Search.
The Direct Code Entry method is the
•
recommended method as it is the simplest and
quickest method in most cases.
The Auto Code Search method searches
•
through all the codes in the remote to find a
code for your device.
Note: This remote comes preprogrammed for
Samsung TVs. Press TV for Samsung TVs.
Direct Code Entry (Recommended)
1. Locate the Code List included with
your remote. Find the section for the
type of device you wish to control, (for
example tv, cbl, dvd, aux). Locate the
brand of your device and circle all the
remote codes for the brand.
Press and hold down the SETUP button
2.
on the remote until the red light on the
remote control turns on. Release the
SETUP button. The red light will remain on.
Note: The red light will either be a small light
at the top of the remote or the power ON/
OFF button.
3. Press and release the device button on
the remote for the type of device you
wish to control, (for example tv, cbl, dvd,
aux). The red light will blink once and
remain on.
Note: Any of the device buttons on the
remote can be programmed to control any
of your devices. For example, you can use
the CBL device button on the remote to
control a Satellite Receiver, Digital Converter
Box, Streaming Media Player or any
device category in the Code List.
6