Package Contents; Installation Instructions - Macally BTEZMOUSEBAT Guia Del Usuario

GB USER GUIDE
Thank you for purchasing
BTEZMOUSEBAT. The Macally BTEZMOUSEBAT is
a rechargeable Bluetooth wireless optical mouse
with a 800/1200/1600 DPI switch button, two
soft-click buttons and scroll wheel/button for a
precise and smooth control. The ergonomic and
ambidextrous design offers maximum comfort to
both left-handed and right-handed users and helps
to increase productivity. The 400mAh built-in
rechargeable battery
BTEZMOUSEBAT for up to 2-3 months before next
charging is required.* No need to buy and replace
batteries anymore! The BTEZMOUSEBAT works
both with Mac and PC and doesn't require any
driver.
About this guide
Before you start using the Macally BTEZMOUSEBAT,
be sure to read this guide in its entirety.
Safety intructions
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 0°C to 40°C. Storage
temperature of -20°C to 65°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 20% to 80%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.

Package contents

• BTEZMOUSEBAT
• Charging cable
• User guide
the Macally
will power the
Hardware basics
Pairing button
On/Off
switch
800/1200/1600
dpi optical
sensor

Installation instructions

The Macally BTEZMOUSEBAT does not require a
driver, only a Bluetooth enabled computer with Mac
OS X v10.6 and later or Microsoft Windows 7 / 8 / 10.
Simply follow the steps below and you are ready to
go!
Pairing the mouse with a Mac
1. To connect the Bluetooth mouse to your
computer, bring it within 1 ft /25 cm range from
your computer.
2. In your Mac, open 'Bluetooth' in 'System
preferences'. Make sure Bluetooth is On.
3. Then, press the pairing button at the bottom of
mouse for 1 second until the blue light flashes
underneath the scroll wheel.
4. 'Bluetooth Mouse' will appear in the list of
Bluetooth Devices. Please click on 'Connect'.
5. When 'Bluetooth Mouse' shows connected, you
are ready to use the BTEZMOUSEBAT.
Pairing the mouse with Windows PC
1. To connect the Bluetooth mouse to your
computer, bring it within 1 ft/25 cm range from your
computer.
2. In your Windows PC, go to 'Devices and Printers'
and select 'Bluetooth Devices'. Make sure
Bluetooth is On.
1
Charging
port
Buttons
Charging
Scroll wheel
/Button
DPI switch
(800 / 1200
/ 1600)
cable