Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Planning
(Continued)
ONE-PIECE DOOR INSTALLATIONS
• Generally, a one-piece door does not require
reinforcement.
If your door is lightweight, refer to the
information relating to sectional doors in Installation
Step 12.
• Depending on your door's construction, you may need
additional mounting hardware for the door bracket
(Step 12).
Without a properly working safety reversal system, persons
(particularly small children) could be SERIOUSLYINJURED
or KILLED by a closing garage door.
• The gap betweenthe bottom of the garage door and the
floor MUST NOTexceed 1/4" (6 ram). Otherwise, the safety
reversal system may not work properly.
• The floor or the garage door MUST be repaired to eliminate
the gap.
ONE-PIECE DOOR WITHOUT TRACK
FINISHED CEUNG
Support bracket
& fastening
hardware is required.
See page 19.
Header Wall
Rail
Motor unit
Sensor
Gap between floor
-_
and bottom of door must not exceed 1/4" (6 ram).
Safety Reversing Sensor
_ader
Rail
CLOSED
PosmoN
Bracket
Doo_
_
_J
I _
Brack_et
Door Arm
_
]
Ul
<_
Rope&Handle
_1
Door
ONE-PIECE DOOR WITH TRACK
Safety
Reversing Sensor
Access
Door
"Safety
Gap between
floor
Reversing Sensor
and bottom of door
must not exceed 1/4" (6 ram),
Garage
Door --
CLOSED
POSITION
///Rail
Bracket
Trolley
I
d
..............
J I
_
RailAssembly
Y////_
B[ac'ke,t
Straight
[
.......
Door
_- Emergency
Release
Arm
_
Rope & Handle
Capítulos
Tabla de contenido
