Iomega ScreenPlay Guía De Uso Rápido página 2

Transferring Media Files to the ScreenPlay
1. Use the included USB cable to connect the ScreenPlay to a USB port on your computer.
2. Connect the power supply to the ScreenPlay and an uninterruptible power supply (UPS) or power outlet.
3. Press the power button on the back of the ScreenPlay to turn it on.
4. Use My Computer or Windows Explorer to copy and paste files to the ScreenPlay drive just as you would with
any other drive on your computer. See the User's Manual on the Solutions CD for suggestions on organizing
your multimedia files.
Playing Media Files on Your TV
1. Connect the ScreenPlay to your TV. You can use the composite AV cable (yellow, red, and white connectors)
to connect video and RCA audio by matching the jack colors on the TV. See the User's Manual on the
Solutions CD for other connection options (component video, coaxial audio, SCART).
2. Connect the power supply to the ScreenPlay and an uninterruptible power supply (UPS) or power outlet.
3. Press the power button on the back of the ScreenPlay to turn it on.
4. Turn on your TV and switch to the correct input channel as needed to receive input from the ScreenPlay.
5. Press the STANDBY button on the remote control or front of the drive to activate the ScreenPlay for playback.
6. Use the cursor keys on the remote control or front of the drive to select and play your media files. Refer to
the User's Manual on the Solutions CD for more information on using the ScreenPlay.
Troubleshooting
TV screen rolls or does not display normally
• Press the NTSC/PAL button on the front of the ScreenPlay drive to toggle the regional setting.
• Press and hold the fast forward button on the remote control, then press MENU repeatedly until the
screen displays normally. This toggles the video ouput setting on the ScreenPlay as follows: 720p
→
Progressive SD Interlace
ScreenPlay does not respond to the remote control
• Make sure you are pointing the remote control directly at the receiver on the front of the drive.
• Make sure the ScreenPlay is receiving power.
• Activate the ScreenPlay by pressing the STANDBY button on the remote control or drive front.
• If you are using the remote control for the first time, pull out the tab on the side of the remote to enable
battery power.
• Check the orientation of the battery in the remote control. The "+" side of the battery should be up.
For additional troubleshooting help, see the User's Manual on the Solutions CD or visit the Support & Downloads
area on www.iomega.com.
Transfert de fichiers multimédia vers ScreenPlay
1. Utilisez le câble USB inclus pour connecter le ScreenPlay à un port USB de votre ordinateur.
2. Connectez l'alimentation au ScreenPlay et à un onduleur (UPS) ou à une prise secteur.
3. Appuyez sur le bouton d'alimentation situé à l'arrière du ScreenPlay pour l'allumer.
4. Utilisez le Poste de travail ou l'explorateur Windows afin de copier et coller les fichiers sur le disque du
ScreenPlay comme vous le feriez avec n'importe quel autre disque sur votre ordinateur. Consultez le
Guide de l'utilisateur sur le CD Solutions pour obtenir des suggestions sur l'organisation de vos fichiers
multimédia.
Lecture de fichiers multimédia sur votre téléviseur
1. Connectez le ScreenPlay à votre téléviseur. Vous pouvez utiliser le câble AV composite (connecteurs jaune,
rouge et blanc) pour connecter le câble vidéo et audio RCA en faisant correspondre les couleurs des prises
sur le téléviseur. Consultez le Guide de l'utilisateur sur le CD Solutions pour d'autres options de connexion
(vidéo composant, audio coaxial, SCART).
2. Connectez l'alimentation au ScreenPlay et à un onduleur (UPS) ou à une prise secteur.
2
→ →
NTSC PAL.
→
SD