Care And Maintenance - TaoTronics TT-SK09 Manual De Usuario

NFC Connection
For NFC-enabled devices, simply turn on the NFC and gently
bump your device against the NFC logo (on the top of the
speaker). When successfully connected, the LED indicator
will be solid blue and a beep sound will be triggered to
indicate a successful connection.
Note: Due to compatibility issue, some NFC-enabled devices
may not work with the speaker.
AUX Mode
Connect any device with the TT-SK09 speaker using the 3.5
mm AUX cable. Turn on the speaker and play music through
the AUX mode.
Note: When AUX cable is connected to the speaker,
Bluetooth and NFC functions will be disabled.
Troubleshooting
Q: My speaker will not switch on.
A: Please recharge it and make sure it has enough power.
Plug the unit into a charger and see if the LED indicator
becomes solid red.
Q: Why can't I pair this speaker with other
Bluetooth devices?
A: Please check the following:
• Your Bluetooth device supports A2DP profile.
• The speaker and your device are next to each other (or
up to 3 feet away).
• The speaker is in pairing mode (the LED indicator will
flash blue quickly).
• Reboot your Bluetooth device.
Q: After connecting and pairing my Bluetooth device, I
cannot hear any music from the speaker.
A: Please check the following:
• Your sound system is connected to the speaker (If the
LED indicator is solid blue then it is connected).
• The music volume is at audible level on both your
Bluetooth device and speaker.
• Your Bluetooth device is playing music.

Care and Maintenance

• Do not put the product under direct sunlight or hot areas.
High temperatures will shorten lifespan of the speaker,
battery, and/or the internal circuit board
• Do not try to take the product apart. It may
cause serious damage
• Do not drop or knock your speaker on hard surfaces as it
damages the interior circuit
• Do not use chemicals or detergents to clean the product
• Do not scrape the surface with sharp objects
07/08