Description Of Symbols; Environmental Protection - Silverline 344944 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries.
Be aware of kickback!
For indoors use only!
Class II construction (double insulated for additional protection)
Caution!
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice
6
Original Instructions
Technical Abbreviations Key
V Volts
~ , a.c. Alternating current
A, mA Ampere, milli-Amp
Ah Amp hours (battery capacity)
n
No load speed
o
n Rated speed
Nm
Newton metres (torque)
° Degrees
Ø Diameter
Hz Hertz
, d.c.
Direct current
W, kW Watt, kilowatt
/min or min Operations per minute
-1
rpm Revolutions per minute
F Farad (capacitance)
dB (A) Decibel sound level (A weighted) m/s Metres per second squared (vibration magnitude)
2
Specification
Voltage: .........................................................................................230V~ 50Hz
Power: .................................................................................................. 1800W
No load speed: ............................................................................. 12,000min
Max depth of cut: .................................................................................... 3mm
Planing width: ..................................................................................... 150mm
Table size: ................................................................................. .580 x 155mm
Fence angle range: ............................................................................ 90-135°
Protection class: ........................................................................................
Weight: .......................................................................................................9kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L : .......................................................................... 101dB(A)
PA
Sound Power L : .............................................................................. 114dB(A)
WA
Uncertainty K: ............................................................................................ 3dB
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration. www.osha.europa.eu provides
information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
-1