Removing The Side Panels; Installing The Motherboard; Installing Pci-E/Pci Card(S); Installing The Psu - Corsair CARBIDE SERIE Manual De Instrucciones

SPEC-01

1. Removing the Side Panels

Simply remove the
thumbscrews then slide the
side panels back and out.
Note: Corsair recommends
removing both side panels and
setting them aside when building
your system to avoid accidental
damage. Both side panels are
interchangeable and should be
removed to reduce clutter.
STEP 03

2. Installing the Motherboard

First, install your
motherboard's I/O shield (see
your motherboard's manual
for guidance).
Align your motherboard with
the pre-installed standoffs.
Use the provided screws
b
to secure the
motherboard to the
motherboard tray.
5

3. Installing PCI-E/PCI Card(s)

Remove thumbscrews and
corresponding slot cover(s).
Install the add-on card and
STEP 02
secure with thumbscrews.
STEP 04
STEP 04
4. Installing the PSU (Power Supply Unit)
Position the PSU on the
bottom of the case then align
the case holes and secure the
PSU with screws provided with
your power supply.
STEP 02
6