Grill-Max 14C Instrucciones De Instalación

These symbols are intended to alert the
user to the presence of important operating
and maintenance instructions in the manual
accompanying the appliance.
www.star-mfg.com/scripts/manuals.aspx
to obtain this units installation & operations manual,
product warranty & other documents.
Using any part other than genuine Star factory supplied parts
relieves the manufacturer of all liability.
Star reserves the right to change specifications and product
design without notice. Such revisions do not entitle the buyer to
corresponding changes, improvements, additions or replacements
for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies
and regulations, the specifications contained in this sheet are subject
to change without notice. While Star Manufacturing exercises
good faith efforts to provide information that is accurate, we are
not responsible for errors or omissions in information provided
or conclusions reached as a result of using the specifications.
By using the information provided, the user assumes all risks in
connection with such use.
GENERAL SAFETY INFORMATION
This equipment is designed and sold for commercial use only by
personnel trained and experienced in its operation and is not sold
for consumer use in and around the home nor for use directly by
the general public in food service locations.
Before using your new equipment, read and understand all the
instructions & labels associated with the unit prior to putting it into
operation. Make sure all people associated with its use understand
the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both
visible and concealed. This unit has been tested and carefully
packaged to insure delivery of your unit in perfect condition.
If equipment is received in damaged condition, either apparent or
concealed, a claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until
after equipment is unpacked, a request for inspection of concealed
damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials
for inspection. The carrier will make an inspection and will supply
necessary claim forms.
Roller Grill Installation Instructions
Go to:
NOTICE
14C, 20C, 30C, 45C,
54IC/ISC, 90IC/SC
Infinite and Electronic Controls
GENERAL INSTALLATION INFORMATION
The unit should be connected to a wall type receptacle, a direct
line or individual branch circuit. An individual branch circuit is
preferred. If connected to an overloaded circuit the grill will not
operate properly. The unit should be level when installed. Models
equipped with bun boxes must be level to utilize the self-closing
feature of the bun drawer. Adjustable 4-inch legs are standard on
the 75 series and available for all other models.
This unit is equipped for the voltage shown on the nameplate. It
will operate on alternating current only, however, the specified
voltage on the nameplate must be applied.
DO NOT CONNECT TO DIRECT CURRENT(DC)
WARNING
IMPORTANT
UNLEVEL UNITS COULD RESULT IN HAVING
PRODUCT TRAVEL FROM ONE SIDE TO THE NEXT,
OVER A PERIOD OF TIME.
MAINTENANCE AND REPAIRS
Contact the factory, a service representative or a local
service company for service or required maintenance.
Go to www.star-mfg.com/scripts/manuals.aspx to find a service
agent near you. Replacement cord sets must be purchased from
Star Manufacturing International, Inc. or our authorized agents.
Should you need any assistance regarding the operation or
maintenance of any Star equipment; write, phone, fax or e-mail
our service department. In all correspondence mention the model
number and the serial number of your unit, along with the voltage.
Business Hours: 8 am to 4:30 p.m. Central Standard Time
Telephone: (314) 678-6303
Fax:
(314) 781-2714
E-mail: [email protected]
Website:
www.star-mfg.com
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A.
®
MODEL
50C & 75C
2M-Z13091, Rev. B 12/03/14