Go Rhino 915105T Instructivo De Instalación página 5

INSTALLATION INSTRUCTIONS
STEP # 2
Assemble the mounting base with the
front and rear tubes as shown. Use the
spacer specified with the front and rear
tube.
Attach each tube to the mounting base
using (2)3/8 " flat washers, (2) 3/8 " lock
washers and (2)3/8 " x 1 1/4" hex bolts, per
side.
Do not install items K and L, cover
plates, if a bed cover is going to be used.
Do not fully tighten bolts, leave loose for
final adjustment
5
REV.01
© 2016 Go Rhino Products. All rights reserved