Adaptec SCSI CARD 29320A Guia De Instalacion página 9

2
Plug the nonterminated end of the cable(s) to the internal LVD
connector.
3
Plug the internal Ultra320/160 and Ultra2 SCSI devices to the
other cable connectors, starting with the connector at the
terminated end of the cable.
Plug first device to
this connector
Note: Internal Ultra320/160 and Ultra2 SCSI devices come
from the factory with termination disabled and cannot be
changed. Proper termination is provided by the terminator
at the end of the LVD SCSI cable.
4
Connect a power cable from your computer's internal power
supply to each internal SCSI device.
Ultra320/160 or Ultra2
SCSI devices
Built-in terminator on cable
6