Troubleshooting - Royal Sovereign RCD-1000 Manual Del Propietário

oPeRatIon
1. Turn the power on by flipping the switch from "O" to "I" position.
2. Place the bill or document under the UV lamp on the detection plate. If the bill has fluorescent ink or fibers, the bill will glow.
note: Avoid using the counterfeit detector under strong sunlight, as it will affect the ultraviolet light.

tRoUBleShootIng

Switch is powered on but bulb is not working.
MaIntenanCe
1. Use alcohol to clean the counterfeit detector regularly, and clean the dust on the ultraviolet tube with a dry towel to maintain ultraviolet light quality.
2. Be certain to switch power off when finishing detection to ensure long bulb life.
3. Disconnect power cord for cleaning or maintenance if the unit will not be used for a long time.
SPeCIfICatIonS
Model
Ambient Temperature
Ambient Humidity
Power Voltage
Power Consumption
Unit Size
Symptom
0~40˚C
40~90%
110V/60Hz (US, CA) or 220~240V/50Hz (EU)
20W
268 x 116 x 107 (mm)/10.6 x 4.6 x 4.2 (in)
Replace with new 5W Ultraviolet bulb.
RCD-1000
3
RCD-1000
Solution