Cleaning and maintaining the machine
7.9 Cleaning the interior
► Only RS: Remove the waste container.
► Clean the inside of the machine with a brush and, if nec-
essary, with a vacuum cleaner.
Never use compressed air for cleaning the in-
side, because otherwise small parts (e.g. strip-
ping residues) become inaccessible on the inside
of the machine. This may result in malfunctions
and operational stoppages.
7.10 Servicing the maintenance unit
1
Figure 7.7 Tool slide
Quarterly
► Pull the stranded wire fixing unit forwards.
► Lubricate the contact surface (1).
► Bring the stranded wire fixing unit back into position.
42
7.11 Servicing the compressed air mainte-
nance unit
Risk of injury posed by electrical volt-
age!
► Make sure that the machine is switched off
and the mains plug has been pulled.
Risk of injury posed by compressed air
hoses swinging around!
► Make sure that the compressed air hose
is disconnected from the compressed air
source.
Figure 7.8 Compressed air maintenance unit
As required
► To drain the condensate press the drain plug (1) up-
wards.
► To change the filter, unscrew the condensate tank (2)
and screw off the filter (3).
► Insert a new filter and screw the condensate tank back
on tightly.
CAUTION
CAUTION
3
2
1
2549630000/00/09.2017