Federal Signal 225XL Instrucciones De Instalación Y Servicio página 6

In extremely corrosive locations, equipment should be periodically inspected
to guard against unusual deterioration and pitting, since this may weaken the
enclosure structurally.
B. Service.
Federal Signal will service your equipment and provide technical assistance
with any problems that cannot be handled locally by Federal Signal's Distributor or
Manufacturer Representative.
Any units returned to Federal Signal for service, inspection, or repair must
be accompanied by a Return Material Authorization number with a brief explanation
of the service being requested and/or the nature of the malfunction. This R.M.A. can be
obtained from a local Federal Signal Distributor or Manufacturer's Representative.
Address all communications and shipments to:
FEDERAL SIGNAL CORPORATION
Industrial Systems
Service Department
2645 Federal Signal Drive
University Park, IL 60466-3195
C. Replacement Parts.
EXPLOSION HAZARD – Substitution of components may impair suitability
for Class I, Division 2. Use only factory authorized replacement parts.
Contact the factory for spare parts availability and part numbers. Typi-
cal spare parts are listed below. Due to certification, certain component parts are not
available for field replacement. Units with damage to specific component parts must be
either replaced entirely or returned to Federal Signal for service.
Description
Fresnel Lens assy., Clear
Fresnel Lens assy., Blue
Fresnel Lens assy., Amber
Fresnel Lens assy., Red
Fresnel Lens assy., Green
Gasket
Exterior Dome, Clear, 225XL
LED Emitter, Amber
LED Emitter, Blue
LED Emitter, Green
LED Emitter, Red
LED Emitter, Clear
Part Number
K8550292A
K8550292A-01
K8550292A-02
K8550292A-03
K8550292A-04
K8444286B
K8444219A-04
K147169A-06
K147169A-07
K147169A-08
K147169A-09
K147169A-10
-5-