Indicators On Lcd - EAS ELECTRIC EASYAIR35H Manual De Instalación Y Usuario

Function buttons(continued)
SET TEMPERATURE( F) NOTE: While the unit is running under SLEEP mode,
AUTO FAN
it would be cancelled if ON/OFF, FAN SPEED, SLEEP
COOL HIGH
DRY MED or MODE button is pressed.
HEAT LOW
10
TIMRT OFF Button
TEMP
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
ON/OFF
MODE
FAN SPEED
in 30 minutes increments, up to 10 hours, then at
SWING ECONOMY TIMER ON
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
TIMER OFF
RESET LOCK
the time setting is 0.0.
FOLLOW LED
ME DISPLAY
11 LOCK Button
Press this recessed button to lock all current
Model: RG51B1/(C)EU, settings, and the remote controller will not accept
RG51B/(C)EU,
any operation except that of the LOCK. Use the
RG51B26/(C)EU,
LOCK mode when you want to prevent settings
RG51B30/(C)EU,
from being changed accidentally. Press the LOCK
RG51B31/(C)EU. button again to cancel the LOCK function. A lock
NOTE: RG51B/(C)EU models symbol will appear on the remote controller display
have no SWING and FOLLOW ME when the lock function is activated.
buttons ;RG51B1/(C)EU models LED Display Button
12
Press this button to clear the display on the
have no FOLLOW ME button;
indoor unit, press it again to light the display .
RG51B30/(C)EU models have no
SWING ,FOLLOW ME buttons and NOTE:
RG51B20/(C)E models have no this feature.
MED FAN feature,and SLEEP button
instead of ECONOMY button; 13
FOLLOW ME/TEMP SENSING Button
RG51B31/(C)EU models have on
Press this button to initiate FOLLOW ME function.
FOLLOW ME button. When the Follow Me function is activated, the
remote display is actual temperature at its location.
The remote control will send this signal to the air
conditioner every 3 minutes interval until press
SET TEMPERATURE( F)
the Follow Me button again.
AUTO FAN
HIGH
COOL The Follow Me function is not available under
DRY MED
HEAT LOW
DRY and FAN mode.
TEMP Switch the operation mode or turn off the unit will
cancel the follow me function automatically.
ON/OFF
MODE
FAN SPEED
14 ION Button
SWING SLEEP TIMER ON
When push this button, the ion generator is
9
TIMER OFF
energized and will help to remove pollen and
ION RESET LOCK
TEMP
LED impurities from the air.
SENSING DISPLAY
13
14
Model: RG51B17/(C)EU
RG51B18/(C)E ,RG51B19/(C)E-M,
5 5

Indicators on LCD

SET TEMPERATURE
TIMER ON OFF
V.1
MODE display
Displays the current selected mode. Including AUTO,
COOL, DRY, HEAT (cooling & heating models only)
and FAN.
Transmission Indicator
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Temp./Timer display
O O
The temperature setting (from 17 C(62 F) to
O O
30 C(88 F)) or timer setting (0~24h) will be displayed.
If FAN mode is selected, there will be no display.
ON/OFF display
This indicator will be displayed when
the unit is operating.
MODE display(FAN mode)
FAN SPEED display
Displays the selected fan speed: AUTO, HIGH, MED
and LOW. Nothing displays when the fan speed is
selected in AUTO speed. When AUTO or DRY Mode
is selected, there will be no signals displayed.
RG51B19/(C)E-M model has no MED
NOTE:
FAN speed feature.
FOLLOW ME display
When pressing FOLLOW ME/TEMP SENSING button
in COOL or HEAT mode, the remote sensing function
is activated and this indicator displays.
TIMER display
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which indicates you
have chosen both the Auto-on time and Auto-off time.
LOCK Indicator
LOCK display is displayed when pushing the LOCK
button. Push the LOCK button to clear display.
6 6