Work Pro WPE 26N Guía Rápida página 8

WPE 26N (Interface) INPUTS
This tab allows you to configure each of the two inputs as a prelude to their mix and allocation to outputs
required. On the one hand, you can change the input gain with the fader as well as "mute" or invert the phase.
The tabs on the right allow:
EQ:
Each WPE 26N has 8 BIQUAD input configurable filters. The graph window displays the result of applying them
in the resulting curve.
Band can select them individually (1-8).
Type allows to select the filter type between 9 options: Bypass, Peak, Low Pass, High Pass, Low Shelving, High
Shelving, Band Pass, Notch and All Pass.
Being able to adjust the Frequency, Gain and Q factor on an individual way.
Each filter has two anchor points, the green can (to move the graph) modify the frequency and the gain
Red pooint adjust the Q factor.
Copy & Paste buttons copy ALL of the EQ tab to duplicate the values ? ? a nd use them in the other input
or modify them from a pattern based on, saving time without needing to start from 0.
DELAY
Quick Guide
This control allows you to set the delay time of the
input. The value changes with the fader and the units
with attached dropdown menu. These units use may
be samples (spl), milliseconds (ms), meters (m) or
ft (feet).
- 7 -
WPE 26N
www.work.es