Tools required: Phillips screwdriver, Power Drill, 3/8" Drill Bit and Rubber Mallet.
9. Ask for assistance to position the assembled Nightstand (A) at the desired location against a wall. If
necessary, adjust the floor levelers under the Nightstand to correct tilting.
10. Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the
tip-over restraint to the unit and the wall
NOTE: The tipping restraint hardware included is for drywall construction. It will be necessary to drill
holes for the wall anchors. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance.
11. The nightstand is now ready for use.
Assembly Instructions
9