Idiomas disponibles
Idiomas disponibles
Introduction
The Gamexpert Racing Wheel incorporates the latest vibration technology; with its powerful built-in vibration motor it llows you to feel
every crash and spin in your favourite PS2
race.
Box Contents
1 x racing Wheel
1 x Pedal Unit
1 x instruction manual
Connection for PS2
TM
Gaming
1.
Ensure that your PS2
console is switched off.
TM
2.
Plug the Racing Wheel into a controller port on your PS2
Ensure that you use the correct plug for PS2
3.
Plug the pedal unit into the Din socket on the rear of wheel.
4.
Set the pedal selector at "FOOT PEDAL" position when you prefer to play the driving game with pedal. Otherwise, please set the
selector at "HAND PADDLES" position so that you can use Left & Right hand paddles to control brake and acceleration function.
5.
Set the console selector at PS2
6.
Turn on your PS2
TM
console.
Note: The Racing Wheel must be kept in its central position when the console is turned on. Do not turn the racing wheel when switching
on the console, as this will cause the wheel to misread its central position and may cause the game to unction incorrectly. To reset, switch
off the console, leave the wheel in its central position and then turn on the console again.
Foot Pedals
The foot pedals are fully analogue and will allow a greater accuracy of acceleration and braking. The wheel can be operated either with
or without the foot pedals fitted, by selecting the "Foot Pedal / Hand Paddle" selector to the desired position.
Note: There are 6 green LED indicators at the front of racing wheel. It is an indication of acceleration whilst you press X" button or step
right pedal for acceleration.
Button Programming
The wheel has programmable memory settings, which will enable you to allocate different button configurations to the wheel and the
pedal unit; this allows your Racing Wheel to be compatible with all driving games.
1.
Connect your racing wheel to your PS2
2.
Press "Program" button, the green LED will light up.
3.
Press the button you wish to change, the green LED will start to flash.
4.
Press the key that you want to program, the green LED will go off and your programming has been accepted.
5.
You can repeat this process on each of buttons, i.e. , , , , L1 , R1 , L2 , R2 , L3 , R3.
Example: if you wish to change the "X" button to function as " " you would simultaneously press 1)."Program" button, 2). press "X" but-
ton and then 3). press " " button.
Program mode will exit if there is no action within 5 seconds while setting up.
Steering Angle Programming
This function allows you to play all racing games at different road condition & any levels of difficulty. Your racing wheel is preset at 60
degrees while you connect the wheel & turn on your PS2
30 Degree: Press "Program" button, the green LED light up, press D-Pad at "up", the LED goes off.
60 Degree: Press "Program" button, the green LED lights up, press D-Pad at "Left" or "Right", the LED goes off.
90 Degree: Press "Program" button, the green LED lights up , press D-Pad at "Down", the LED goes off.
Mode
Mode function enables you to play racing games at Analogue, Digital or Negcon mode. Simply press "Mode" button whilst you want to
change the existing mode to other mode. The mode LED indicator will change colour with every mode change.
Caution:
Do not connect your racing wheel to more than one console at the same time. Otherwise, it will cause abnormal functions or damage.
Connection for Computer USB Gaming
1.
Compatible USB1.0 with USB 2.0 version.
2.
Supports Win98, WinME, Win2000, WinXP operating system.
Operating Process:
1.
Put the GAMES/USB select switch at the front of steering wheel to USB position, and connect USB cable of steering wheel to USB
port of computer.
2.
Install the enclosed disc and follow the steps.
3.
When necessary calibrate the wheel, go to "control panel" in Windows and choose "game controllers". Select "USB dual vibra
tion Joystick", by dubble clicking you enter the "test/calibrate" menu.
/ PC USB racing games. The quick-shift gear change ensures you'll never get behind in a
TM
console.
TM
TM
console.
position.
TM
console as in "Connection for PS2TM Gaming".
TM
TM
console. Simply follow the procedure to change your desired steering angle.
