1
2
3
4
2 Screws
Type 1: Hung Window Installation
Foam seal B
(Adhesive type-shorter)
Window Slider B
(if required)
Window Slider A
Foam seal C
(Non-adhesive type)
Security Bracket
10
Foam seal A
(Adhesive type)
Cut the adhesive foam seal
A and B strips to the proper
lengths, and attach them to
the window sash and frame
as shown.
Insert the window slider
assembly into the window
opening.
Cut the non-adhesive foam
seal C strip to match the
width of the window. Insert
the seal between the glass
and the window frame to
prevent air and insects from
getting into the room.
If desired, install the
security bracket with
2 screws as shown.