EWT CS 4 COMFORT Manual Del Usaurio página 38

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

7. Make sure the Start/Stop switch on the appliance is in the "Stop" position ("O" position) before plugging
into the mains. Plug it into the mains (Fig. 7).
8. Start the motor with the Start/Stop switch in the "Start" position ("I" position) (Fig.8).
9. When you have finished vacuuming, stop the motor by putting the Start/Stop switch in the "Stop"
position ("O" position). Unplug from the mains.
Check the dust bag regularly and replace it when it is 2/3 full. The bag is manufactured so that only
air may pass through the paper and not the dust, this is why a used dust bag should not be
reused.
Guidelines:
Do not use the dust bag to vacuum wet objects or with sharp edges.
O = OFF
When using a cartridge filter, you should first remove the foam filter or the reusable cloth filter. Insert the
filter by the top in the filter housing and lock the base. After prolonged use it can be cleaned by tapping it
or by using a small brush.
I = ON
= Prise Confort
38
Tabla de contenido

Solución de problemas

loading

Tabla de contenido