Maytronics DIY Manual De Instrucciones página 6

DIY Analyzer
2. Testing Procedures
The Dolbox/scanner test
To scan the motor unit and display the data on your computer, open the Analyzer program and do as
follows:
Connect the Dolphin cable Amphenol to the
Analyzer motor unit socket and press "Test."
A. When all LEDs are green – the motor unit is ok and the Analyzer has finished collecting the
motor unit data and has sent it to the Analyzer program on your computer.
Wait until all LEDs are green.
The red and green LEDs flash to signal the
Analyzer is collecting data from the MU and
sending it to your computer.
The data in the Analyzer program
Print file
Save file