Technical Specifications - HK Audio 5 Serie Manual De Instrucciones

Cluster / Head Stack Cluster
You can extend horizontal coverage to around 140° by clustering two
LINEAR 5 LTS As. To this end, place them side by side with a 30° angle of
splay (around 24 cm as pictured) between the two to minimize frequency
cancellation and phasing eff ects.
An optional accessories kit
with a pick point and a cluster
plate is available if you wish to
fl y this cluster. It provides two
anchor points for attaching
rigging hardware such as steel
cables or slings, connects the
two housings and prevents
them from sliding apart.
If you wish to stack the system, we recommend that you do so as
follows:
Center the cluster on the top subwoofer in a stack of three SUB L 4000 As,
and then aim it horizontally to cover the target area. Be sure to maintain
that 30° angle of splay.
Follow the same procedure for a head stack cluster.
You can also secure the cluster in the usual way using ratchet straps for
added safety.
70°
70°
approx.
24 cm /
30°
9 1/2"
5 Technical Specifi cations
Model
Frequency response +/– 3 dB
Frequency response –10 dB
Max. SPL@10% THD
Max. SPL Peak@10% THD
Max. SPL calc.
Amp/type
Power output, amp
140°
Amp to driver
Amp to woofer
Protective circuits, amp
Protective circuits, speakers
Power consumption
Input sensitivity
Audio ports
Mains connector
Woofers
HF driver
Horn directivity
Crossover frequency
Pole mount
Rigging/ pick points
Grips
Optional accessories
Housing
Front grille
Finish
Dimensions (WxHxD)
Weight
6 Applications
See the appendix starting on page 32.
LINEAR 5 LTS A 1.1
LTS A
115 Hz – 14 kHz
100 Hz – 20 kHz
133 dB half space
138 dB half space
141 dB half space
Class D biamped
1000 W
350 W @ 4 ohms
650 W @ 4 ohms
Under-voltage, thermal, short-circuit,
and over-current protection
Subsonic 24 dB / oct., peak limiter
3.3 A / 230 V nominal pursuant to
EN60065
+4 dBu @ Gain center-notched / L5
System Level
XLR / 1/4"(6.3 mm) jack combo In,
XLR Thru
1x IEC socket with V-Lock cord retainer
3x 8" (16 ohms) with 1.5" voice coil
(neodymium)
1x 1" (16 ohms) with 1.7" voice coil
60° x +5°/–25° MCT horn
1.7 kHz FIR X-over with 24 dB/oct.
MonoTilt 0°
5x M8
2 integrated
Protective cover, Tilt Bracket, Tilt
Bracket Extension, Head Stack
Clustering Plate, AP-8
Birch 15/18 mm multiplex, 9/13-ply
2 mm metal grille backed with acoustic
foam
Acrylic enamel, black
44 x 68 x 46,1 cm
17-5/16 x 26-25/32 x 18-5/32"
24,9 kg / 54,9 lbs.
7