Error Codes - Stellcase Ology Guía Rápida

5.4 Setting the displayed desk height
 Press the buttons 1, 2 and
 The display shows "ADJUST HEIGHT" and the current value of the desk height.
 Move the toggle switch up or down to correct the displayed desk height. The set height starts flash-
ing and the blue lightbar fills up.
Please note: The desktop does not move during the process.
5.5 Changing the displayed unit – CM / INCH (
 Press the buttons 1 and
INCH and vice versa.
 The new selection starts flashing and the blue lightbar fills up.

6. Error codes

Error codes are always indicated on the display with an "E" for error followed by a number. The most
common error codes are also provided with an extra function such as "E01" or "INITIALISE". The
display alternates between a numeric code and a text message. The error code is indicated for as long as
the toggle switch remains pressed.
The most important error codes:
EN
The complete list of error codes is available in the user manual (steelcase.com)
7. Service and Contact Details
Manufacturer
Steelcase AG
Brienner Str. 42
80333 München
122957
at the same time for four seconds.
Active Touch control
at the same time for three seconds to change the unit from CM to
E53-E64 COLLISION
E41-E52 OVERLOAD
E01 INITIALISATION
Phone: +49 (0) 80 31 405 – 111
E-mail: DE [email protected]
EN [email protected]
FR [email protected]
ES [email protected]
)
Rev. E