First Step - PUFF AVATAR Q Manual De Instrucciones

FIRST STEP

Remove the battery and the cartomizer from their seating.
SECOND STEP
Fill the empty cartomizer with PUFF liquid for electronic cigarettes (see "Operating mode" for a correct
liquid refilling).
THIRD STEP
Screw the cartomizer to the battery.
FOURTH STEP
Wait 10 minutes before use, so that the resistance and the cotton can soak up the liquid.
FIFTH STEP
Smoke normally with long gentle draws.
OPERATING MODE
The circuit is activated by pressing 5 times the button on the backing of the battery.
The two leds under the button will switch on instantly and will indicate the battery charge status (see
table at the end of language section). Hold down the button during inhalation. By releasing the button,
vaporization will cease and the operation mode turns to standby. The ideal angle of use is situated
between 30° and the horizontal position. The AVATAR Q electronic cigarette supplies up to 32W at 3.7V
(constant) and adjusts the wattage according to the resistance detected in the cartomizer.
21