Holmatro BMC1 Manual página 24

EN
2.7 Guarantee
Refer to the general terms and conditions of sale for the guarantee conditions, available from your
Holmatro dealer on request.
Holmatro draws your attention to the fact that every guarantee on your piece of equipment or system
will lapse and that you must indemnify Holmatro against any possible product liability and responsibility
if:
• service and maintenance are not carried out strictly in accordance with the instructions, repairs are
not performed by a Holmatro Certified Technician or are performed without prior written consent;
• self-made changes, structural changes, deactivation of safety devices, injudicious adjustment of
hydraulic valves and faulty repairs have been carried out;
• non-genuine Holmatro parts or lubricants other than the types prescribed are used;
• the piece of equipment or the system is used injudiciously, through errors of operation, improperly,
negligently or not in accordance with its nature and/or purpose.
3 Description
3.1 Equipment
The mains connector has been specially developed for, and -consequently- is exclusively intended for
powering Holmatro Greenline rescue tools.
NOTE
The mains connector may only be used to replace the BPA28*-series battery packs.
3.2 Type designation
Example: BMC1
/i
Digit Example
1-3 BMC
4 1
24
Description
Mains Connector
Model number:
BMC1: 220 - 240 VAC input voltage, 50/60 Hz
BMC2: 100 - 120 VAC input voltage, 50/60 Hz
916.001.297_002 BMC1 / BMC2