Bracket Installation - Steren STV-065 Manual De Instrucciones

2. BRACKET INSTALLATION

1.- Locate the place where you want to install the
screen.
2.- Place the clamping arm (C) on the ceiling and
mark the places where you have to drill.
3.- Once you made the holes, insert plugs (L) in
each one.
4.- Insert the screws (M) and washers (K) in
the plugs. Do not tighten completely. Place the
bracket and rotate slightly to the left. Tighten the
screws fi rmly to secure the stand.
Place this
edge up.
6.- Use the supplied screws (E, F, G, H, I, J) for
secure the fastening bar (B) on screen's back
(choose the screws according your screen).
7.- Place the screw (J) which allows horizontal
movement and tighten until fi rm.
4
ARM "C"
BLACKPLATE "A"
K
M
5.- Place the backplate (A) and
secure. The blackplate is placed
correctly only if the bubble is in
middle of the two lines.
DO NOT USE WITH PLASMA SCREENS
L
ARM "C"