Sage the Q BBL820 Guía Rápida página 4

• This appliance shall not
be used by children.
• Do not leave the appliance
unattended when in use.
• Allow the motor to rest for
1 minute between each use.
• Be careful when handling and
cleaning blades, as they are
very sharp. Mishandling of
the blades may cause injury.
• Avoid putting the cup or jug
on the motor base while
the motor is still spinning.
• Do not operate without any
ingredients in the cup or jug.
• Never attempt to operate
with damaged blades, or
with utensils, or any foreign
objects inside the cup or jug.
• Do not put the cup or jug in
extremes of heat or cold, for
example placing a cold jug
into hot water, or vice versa.
• Lid must be firmly secured
to the jug before operation
to ensure internal contents do
not escape, spray or overflow.
• Do not remove the jug from
the motor base while blender
is in use.
• Do not use blender while
OVERLOAD PROTECTION
is flashing on the LCD. If this
occurs, unplug the blender
and wait for 30 minutes until
the motor has cooled. Once
cooled, you will be able to use
the blender as usual again.
4
• Be careful when pouring hot
liquids into the blender as
splashing may occur due
to the creation of steam.
• When blending hot liquids,
ensure the inner measuring
cap is in place. The cap
will protect you from hot
liquids splashing out during
blending and includes vents
designed to relieve pressure
and avoid steam build-up.
• Be careful when removing the
lid after blending hot liquids as
steam may become trapped
and be ejected out of the jug
when the lid is removed.
• Strictly observe the reduced
capacity limit for blending
hot ingredients. Failing to
follow this instruction may
cause personal injury with
burns from hot liquid.
• Never blend hot ingredients
or liquids using the vacuum
blending feature (vacuum
blending is an optional feature
achieved through the use
of the Sage vacuum pump,
supplied separately).
• Never use attachments or
accessories that are not
supplied with this product, or
that have been authorised by
Sage for use on this product.
Failing to follow this instruction
may cause product malfunction,
product damage or pose
a safety risk.