© 2009-2010, Moog Videolarm, Inc. All Rights Reserved
F D W 7 5
Fusion Dome (Outdoor Wall Mount with Housing)
Installation and Operation Instructions for the following models:
FDW75C2N
IP Network Ready 7" Outdoor dome hsg w/wall mount, clear dome, w/24Vac
input, heater/blower, fan an IP Network PTZ camera, 120 to 24Vac transformer.
FDP75C2N
IP Network Ready 7" Outdoor dome hsg w/pendant mount, clear dome, w/24Vac
input, heater/blower, fan an IP Network PTZ camera,120 to 24Vac transformer.
IFDW75CN
IP Network Ready 7" Indoor dome hsg w/wall mount, clear dome, w/24Vac input,
heater/blower, fan an IP Network PTZ camera, 120 to 24Vac transformer.
IFDP75CN
IP Network Ready 7" Indoor dome hsg w/pendant mount, clear dome, w/24Vac
input, heater/blower, fan an IP Network PTZ camera,120 to 24Vac transformer.
FDW75C2NE IP Network Ready 7" Outdoor dome hsg w/wall mount, clear dome, w/24Vac
input, heater/blower, fan an IP Network PTZ camera. (European Model)
FDP75C2NE IP Network Ready 7" Outdoor dome hsg w/pendant mount, clear dome, w/24Vac
input, heater/blower, fan an IP Network PTZ camera. (European Model)
Before attempting to connect or operate this product,
please read these instructions completely.
www.videolarm.com
CERTIFIED
81-IN5358
07-26-2010
Tabla de contenido
loading

Resumen de contenidos para Moog FDW 75 Serie

  • Página 1 © 2009-2010, Moog Videolarm, Inc. All Rights Reserved F D W 7 5 Fusion Dome (Outdoor Wall Mount with Housing) www.videolarm.com Installation and Operation Instructions for the following models: FDW75C2N IP Network Ready 7” Outdoor dome hsg w/wall mount, clear dome, w/24Vac input, heater/blower, fan an IP Network PTZ camera, 120 to 24Vac transformer.
  • Página 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK).
  • Página 3 LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosuresand Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation /tour operation...
  • Página 4: Electrical Specifications

    Electrical Specifications Contents of Box Power 24VAC FDW75 Class 2 Only 24 VAC 26 Watts Accessories: Heater: 25 Watts, Blower: 1 Watt Camera Power: 40 Watts Max Tools Required: .100” Flat Head Screwdriver Phillips Head Screwdriver English 24 VAC 26 vatios Accesorios: Calentador: 25 Vatios, Soplador: 1 vatio Energía De la Cámara fotográ...
  • Página 5 WALL MOUNTING 4”-5” Trim incoming control & power wires to 4”- 5”, Bracket is designed for 45° conduit tting (If using the for either wall or pendent bracket conduit). Run wire into bracket secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el •...
  • Página 6 WALL MOUNTING Important Gasket Must be in place 26 Watts COAX (coax wire not supplied) Wiring the dome can be completed by Align large arrows referring to the diagram. • Atar con alambre la bóveda puede ser terminada • Con seguridad soporte del montaje a emparedar. Tire del cableado refiriendo al diagrama.
  • Página 7 FOR PENDENT/ WALL MOUNTING 4”-5” Trim incoming control and power wires to 4-5 for Secure lanyard to lanyard clip either wall or pendent bracket • La tapa segura de la cubierta SM5 con mercancías duras • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado.
  • Página 8 Important Gasket Must be in place Align large arrows To lock turn clockwise • Alinee las flechas grandes • Alinee las flechas grandes • Alignez les grandes flèches • Alignez les grandes flèches • Richten Sie große Pfeile aus • Richten Sie große Pfeile aus •...
  • Página 9 RJ45 24VAC POWER Camera Max 40 Watts Camera Orange Heater/Blower Yellow 26 Watts Heater/Blower Green Alarm 1 Blue Alarm 2 Violet Alarm 3 Gray Common White Make the appropriate male and female connections. Indoor model does not include pre-run cables. •...
  • Página 10 Axis 213 (3) #8x3/8” Captive Screw Mounting Plate 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
  • Página 11 Axis 215 (3) #8x3/8” Mounting Plate ½" 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate using (4) #8 bolts and star washers. Place (3) #8x3/8” screws on the spacers and line up the mounting slots. Slide plate in and secure. •...
  • Página 12 Connection Module Screw Power Board This is what the typical path of illumination will look like with the setting at 30 degrees. To remove the power board, use screwdriver to release plastic fasteners by applying pressure to sides while pulling out. Attach connection module as shown.
  • Página 13 Axis 233D Remove power board located inside of housing and then remove mounting bracket. • Quite a tablero de energía situado dentro de la cubierta y después quite el soporte de montaje. • Enlevez carte d'alimentation situé à l'intérieur de du logement et puis enlevez le support. •...
  • Página 14 Acti 8201 Captive (4) #8x3/8” Screw Mounting Plate ½" 1" 2" MOUNTING HOLE Attach camera bracket to mounting plate using (1) ¼” x 20 bolt, washer and lock washer. Complete assembly as shown, securing camera and mounting plate to spacers. •...
  • Página 15 CANON - VB-C10 Captive Screw Mounting Plate (3) #8x3/8” 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
  • Página 16 ELMO 400/401 Captive (4) #8x3/8” Screw Mounting Plate ½" 1" 2" MOUNTING HOLE MOUNTING HOLE Attach camera to mounting plate using (4) #8 screws, star washer, and nuts. Complete assembly as shown, then secure camera and mounting plate to spacers. •...
  • Página 17 JVC-VN625U Captive (4) #8x3/8” Screw Mounting Plate 1" MOUNTING HOLE Attach quick release bracket to mounting plate using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. • Una el soporte rápido del lanzamiento a la placa de montaje usando (4) los tornillos #8 y la arandela de la estrella. Termine a asamblea como cámara fotográfica demostrada, después segura a la placa rápida del lanzamiento.
  • Página 18 Panasonic KX-HCM180 Captive (3) #8x3/8” Screw Mounting Plate 1" 2" MOUNTING HOLE Attach camera to mounting plate using (1) ¼” x 20 bolt, lock washer, and washer. Complete assembly as shown, then secure camera to the quick release plate. • Ate la cámara a la pletina usando (1) perno de x 20 del ¼”, arandela de cerradura, y arandela. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
  • Página 19 Panasonic WV-NS954 (4) #8x3/8” Mounting Plate ½" MOUNTING HOLE Attach bracket to (4) spacers using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. • Ate el soporte (4) a los espaciadores usando (4) los tornillos #8 y arandela de la estrella. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
  • Página 20 Sony RZ25 Captive (3) #8x3/8” Screw Mounting Plate ½" MOUNTING HOLE Attach camera to mounting plate using (1) ¼” x 20 bolt, washer, lockwasher, (2) M3 x 8mm bolts, and lockwashers. Complete assembly as shown, then secure camera to the quick release plate. •...
  • Página 21 Sony RZ50 Captive (3) #8x3/8” Screw Mounting Plate 2" MOUNTING HOLE Attach camera to mounting plate using (1) ¼” x 20 bolt, washer, lock washer, and (2) M3 bolts and washers. Complete assembly as shown, then secure camera to the quick release plate. •...
  • Página 22 TOSHIBA Captive (3) #8x3/8” Screw Mounting Plate 1" 2" MOUNTING HOLE Attach camera to mounting plate using (4) #8 screws, star washer, and nuts. Complete assembly as shown, then secure camera to the quick release plate. • Ate la cámara a la pletina usando (4) los tornillos #8, arandela de la estrella, y tuercas. Termine a la asamblea como se muestra, entonces cámara segura a la placa del lanzamiento rápido.
  • Página 23 Before After Loop the lanyard around the tab inside the Align the arrows on the outside of the dome housing. and lock. • Alinee las flechas en el exterior de la bóveda y • Coloque el acollador alrededor de la lengüeta trábese.
  • Página 24 PB24 Addendum Additional wires are provided to run power to PB24. Use with connector supplied. Run RJ45 connector through PB24, wall mount, and connect lead from housing. • Los alambres adicionales se proporcionan a la energía funcionada con a PB24. El uso con el conectador proveyó. Funcione con el conectador RJ45 con PB24, emparede el montaje, y conecte el plomo de la cubierta.
  • Página 25: Replacement Parts List

    Replacement Parts List FDW75 PART NUMBER DESCRIPTION FD7C CLEAR REPLACEMENT CAPSULE 1A FD7T TINTED REPLACEMENT CAPSULE RPFD7501 LOWER TRIM RING RPFD703 DOME CLAMPING RING RPNET02 NETWORK HGS POWER SUPPLY RPFD072 24V HEATER 5A RPFD072/12 12V HEATER (12VDC MODELS ONLY) RPFD080 BLOWER RP3510 CAMERA BRACKET...
  • Página 26: Product Registration/Warranty

    Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second-to-none in the security industry. Should a problem arise, rest assure that Videolarm stands behind its products by offering some of the most impressive warranty plans available: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on all camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Tabla de contenido