Ethernet Connections Diagram - Chauvet Professional NEXUS Aq 5x5 Guía De Referencia Rápida

Nexus™ Aq 5x5 QRG
Ethernet
Connections
Diagram
protocol, such as Kling-Net
Kling-Net Mode
Art-Net™ Mode
Reset To
Factory
Defaults
NOTE: Do not use the
Computer or Controller
Running TCP/IP-based
or Art-Net™
Kling-Net is a network protocol that uses TCP/IP to send DMX over
a network and into the Neutrik® etherCON® connection ports of
the Nexus™ Aq 5x5 panels. Kling-Net works seamlessly with
Kling-Net-supported ArKaos software for configuring and mapping
display devices. For more information, see the User Manual on the
Chauvet website at
literature/.
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX
signals over a network and into the Neutrik® etherCON® connection
ports of the Nexus™ Aq 5x5 panels. Art-Net™ requires configuration
through the control panel. For more information, see the
this QRG or the User Manual on the Chauvet website.
An Art-Net™ Primer is available from www.chauvetprofessional.com.
Art-Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Nexus™ Aq 5x5 panels do not work with Art-Net™ controllers sending
in Broadcast mode. For information about the controller's mode, see
the controller's User Manual.
1. Disconnect the Nexus™ Aq 5x5 from power.
2. Press and hold <MENU> and <ENTER> simultaneously.
3. Reconnect the Nexus™ Aq 5x5 to power.
4. Release <MENU> and <ENTER>. The words Factory reset?
ENTER = Confirm show on the display.
5. Press <ENTER>.
Nexus™ Aq 5x5
Panels
router WAN port!
Router
http://www.chauvetlighting.com/product-manuals-
5
EN
More
Nexus™ Aq 5x5 Panels
Menu Map in