AKASO K1 Manual De Usuario página 4

• When the alarm 1 goes on, press alarm 1 button to turn it off.
• There is a symbol alarm 1 in the middle-upper part of screen which
means that you turn the alarm 1 on.
• The setting of alarm 2 is the same as alarm 1.
Note: This product provides dual alarm clock function, alarm 1 and
alarm 2 for long-term alarm clock (Once clock set up , as long
as the alarm is not manually closed, thealarm willwork
everyday).
1.3. Snooze Setting
• Press the rotary button when the alarm goes off to enter snooze
setting. It will activate 3 times and with a 10 minutes interval.
• When the alarm goes off, without any action to turn it off the alarm
clcok, the alarm will persist to ring and turn off automatically after
60 minutes.
2. Fm Radio Play Press MODE button to choose FM mode(There is
a FM symbol in the upper left part of LCD screen).
2.1. Auto-scan radio station Long press rotary button to auto-scan
radio station. In this mode, FM radio will scan and auto-store the
scanned stations (freuency from 87.5MHz to 108MHz). If this
device auto-scan a valid radio station, it automatically saves the
station. When auto-scanning is finished, it goes back to play the
1st stored station. Pressing next of previous button can select
the stored station.
2.2. Manual-scan radio station Long pressing MODE button until the
FM symbol begins to flash to enter manual-scan radio station
mode. Once selected, then revolve rotary button to adjust
frequencies. Short press rotary button to saved radio stations.
3
Tips: If you are in a bad signal environment, you can plug in the Aux
- in cable and straighten the Aux-in cable. A straight Aux-in
cable can be used as an external antenna.
3. Auxiliary Play press MODE button to choose AUX mode (There
is a AUX symbol in the upper left part of LCD screen).
• Connect your device with the alarm clock by 3.5mm stereo line
cable.
• Press the rotary button to Play / Pause. Revolve rotary button to
adjust volume.
4. Thermometer
• Press temperature button to switch between Celsius and Fahrenheit.
5. Display Brightness Adjustment
• Press ROtary button to adjust 5 levels brightness of the LCD
display o turn of the LCD brightness.
Noter: LCD brightness cannot be adjusted in FM and AUX mode.
6. USB Charging
• The unit is added with 2 USB output chaiging interface. Dual USB
interface can charge for iPod, mobile Phone and iPad at the same
time.
• USB 1 output 1.1A interface can only charge for mobile Phone.
• USB 2 output 2.1A interface can only charge for iPad.
7. Back-up Battery
• The clock has a back-up power system which can be powered by 3
AAA batteries(not included) to ensure the memory of time during
a power failure. The power source from AC to battery power is
automatic.
4