Sharpening Knives; Opening Bottles - CASO DESIGN D10 Manual De Instrucciones

► This can opener should not be used to open cans designed to be opened by another
method such as rolling key, for example.
► Occasionally, badly dented cans will cause the can opener to stall. If this happens,
grasp the dented can and guide it through the cutting action manually until the damaged
areas are opened. If this doesn't work, begin the cutting action again in a new place on
the can lip which isn't dented.
► To open a can that has become jammed, raise the can opener lever and release the
can. Begin the cutting action again in a new place on the can lip.

15.2 Sharpening knives

Be sure knife is clean and free of grease.
Place the heel of knife into the guide slot located on the back of the can
opener.
Lightly draw the blade towards you, applying a slight downward pressure.
Repeat this procedure four to five times, to put a sharp edge on the knife.
Warning
► Always use safe practices when using or sharpening knives. Maintain hands away from
knife blade.
► Don't try to sharpen blunt hollow grinded blades (with concave sharpened blades) or
serrated blades.

15.3 Opening bottles

► The bottle opener at the front of the unit will only remove metal bottle
caps.
► Do not use the bottle opener for screw-off caps or open cans.
To open a bottle, grasp it and position the cap under the metal "hook" in
the bottle opener located on the front of the unit below the lever.
Hold the can opener with one hand and pull down with the other hand to
pop the cap off.
► Be sure that the "hook" is not under the bottle neck or the glass may
break.
Caso D10
Please note
Please note
Please note
Warning
33