Getting Started; Dab Mode - auna DR-160 BT Manual De Instrucciones

EN
16

GETTING STARTED

Power
•
Plug the connector into the back of the system labeled DC IN and the
power supply into the mains.
• Switch the power to ON, then "welcome to digital radio" will show on
the screen.
• The radio will be in standby mode showing the time, date and
alarm1and Alarm 2.
• Press Standby/Mode button to turn on the unit.
• The system should go straight to Digital Radio and scan automatically.

DAB MODE

• Press Standby/Mode to select DAB radio, then press volume/ok button
to confirm. Full extend the antenna
• To auto scan, press Scan button and then release.
• This will start scanning up the frequency band and store all stations that
have a good signal.
• The radio will automatically save all the stations with strong signal.
After searching has finished it will automatically play the first station
stored.
• To listen to all stations that have been stored press "Next" or "previous"
button to scroll through the stations.
• The radio will display station information when you press the Info/Menu
button. Press multiple times to view all information available.
• When you power up the radio again after switching off, it will
automatically tune to the same station (DAB+ or FM) that was last
selected.