Use Of The Appliance; Recommendations For Energy Saving - Olimpia splendid Ci2 Wall Instrucciones Para Uso Y Mantenimiento

3 - USE OF THE APPLIANCE

The appliance operating modes can be selected only using the remote control supplied.
The reception of the selected function is confirmed by the emission of a "beep" by the buzzer.
If the remote control does not work or is not momentarily available, the appliance can be switched on and
off by opening the front panel (2) and pressing the key (6) (Fig.3).
As well as switching the appliance on and off, with this key it is possible only to select two operating modes;
"AUTOMATIC" (AUTO) and "FORCED COOLING (COOL)".
Press the key one or more times as follows:
• AUTOMATIC (AUTO)
The operating LED (5) switches on and the appliance starts in AUTOMATIC mode.
The remote control is active and operates on the basis of the signal received.
• FORCED COOLING (COOL)
The operating LED (5) flashes and the appliance operates in automatic cooling mode for 30 minutes with the
fan at high speed, before passing AUTOMATIC mode.
The remote control is disabled.
• OFF
The operating indicator light (5) switches off. The appliance is OFF, while the remote control is enabled.

3.1 - RECOMMENDATIONS FOR ENERGY SAVING

Below find simple recommendations for reducing consumption:
• Always and constantly keep the filters clean (see maintenance and cleaning chapter). ■ A dirty air filter
will reduce cooling or heating efficiency, please clean it once two weeks.
• Keep doors and windows closed. If the doors and windows remain open, air will flow out of your room
causing a decrease in the cooling or heating effect.
• Do not let sun rays penetrate freely into the room (we recommend using curtains or lowering blinds or
closing the shutters).
• Do not obstruct the air flow path (input and output) of the appliance; this, in addition to obtaining a non-op-
timal yield, also affects the correct operation of the appliance and the possibility of irreparable damages to
the appliance itself.
• Never place objects near the air inlet or the air outlet of the unit. It may cause deterioration in the effect or
stop the operation.
• Adjust the air flow louver properly and avoid direct air flow to room inhabitants.
• Adjust the room temperature properly for a comfortable environment. Avoid excessive heating or cooling.
• Ventilate often. Extended use requires special attention to ventilation.
• Never place objects near the air inlet or the air outlet of the unit. It may cause deterioration in the effect or
stop the operation.
• Set the timer.
• If you don't plan to use the unit for a long time, please take the batteries from the remote controller. When
the power is on, some energy will be consumed, even if the air conditioner isn't in operation. So please dis-
connect the power to save energy.
• Keep the indoor unit and remote controller at least 1 m away from televisions, radios, stereos, and other
similar equipment. Failing to do so may cause static or distorted pictures.
EN - 12
> ON/AUTOMATIC > FORCED COOLING > OFF > ...