Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Illustration
½" BSPT-14×2 & Shockproof installation bracket
½" NPT / BSP T-14×2
80
Curve
TD5-A24-2505 Performance
• Capacity (l/min)
• Head (M)
• Power (W)
Installation Direction
It is preferred that the pump always remains in a horizontal direction, pumping upward (as shown
in the left illustration).
It is acceptable for the pump to be mounted under the piping in a vertical direction.
In order to avoid air bubbles, please ensure adequate water into the pump.
It is recommended to install the pump in a position lower than the liquid level of the tank.
To minimise frictional resistance, the shortest piping possible with a minimum number of bends
should be utilised on the inlet or suction side of the pump.
Install a water softener if you have hard water.
90.7
Shockproof installation bracket
5
4
3
2
1
0
0
6. 5
10 0
12 0
TD5-A24-2505 Performance
P ~ Q
25L/min
= =
4.5m
5
10
15
=
Capacity (L/min)
EN
30
24
18
12
6
0
20
25
Tabla de contenido
