Página 1
Cambridge Fully Assembled Outdoor Veneer Grill Island Instruction Manual Cambridge montado completamente Isla parrilla al aire libre Manual de instruc- ciones...
Página 2
Cambridge Fully Assembled Outdoor Veneer Grill Island Layer Reference Guide: Guía de Referencia: Grill Island Dimension: Island Grill Dimensiones: 6’ 3 1/4” Long 6’ 3 1/4” Largo 3’ Deep 3’ Profundo 3’ 2” High 3’ 2” Alto Grill Island Weight: Island Grill Peso: 3985 lbs.
Página 3
Cambridge Fully Assembled Outdoor Veneer Grill Island Tools Required for Grill Module Installation: Material Required: Skid steer loader or other type of machinery with ¾” clean stone (approx. 1/2 ton) forks capable of lifting 4000 lbs. Concrete (approx. 5 - 80 lb bags) Cambridge concrete adhesive approx.
Página 4
Cambridge Fully Assembled Outdoor Veneer Grill Island Herramientas Necesarias Para la Instalacion de la Material Necesario: Parrilla del Modulo: ¾” piedra limpia (aprox. 1/2 tonelada) Concreto (aprox. 5-80lbs bolsas ) Minicargador o de otro tipo de maquinaria con horquillas Cambridge concretas adhesivo capaces de levantar 4000 libras.
Página 5
Cambridge Fully Assembled Outdoor Veneer Grill Island Concrete Base: Call 811 for information on underground utility marking. The Grill Module base is 32” deep by 72” long along the longest dimensions of the back side. (Follow diagram for all dimensions when making the base).
Página 6
Cambridge Fully Assembled Outdoor Veneer Grill Island Concrete Pad Detail: Electrical conduit as per local code / Conducto eléctrico según código local 72” 32” 10” 56” 10” 6” 6” Rebar: Place 3” below surface of concrete / Rebar: Lugar 3” abajo superficie del concreto 4”...
Página 7
Cambridge Fully Assembled Outdoor Veneer Grill Island Included In This Kit: Cambridge Veneer Grill Unit Grill Granite...
Página 8
Cambridge Fully Assembled Outdoor Veneer Grill Island Fully Assembled Outdoor Grill: Step 1 Step1: Paso 1: Lay out the first layer matching up the numbers Coloque la primera capa haciendo coincidir los centered on the cured concrete base pad. números centrados en la plataforma de base de...
Página 9
Cambridge Fully Assembled Outdoor Veneer Grill Island FORK PLACEMENT ON THE PALLET Position the forks to pick up the Veneer Grill Island in the spaces that the arrows are pointing to. This fork position is critical to the placement on the first layer.
Página 10
Cambridge Fully Assembled Outdoor Veneer Grill Island Fully Assembled Outdoor Grill: Step 2 Place filler block in when the grill is installed on the first layer. Paso 2: Step2: Carefully lift the grill unit with a capable ma- Cuidadosamente levante la unidad parrilla con una chine and place centered on the first layer máquina y colocar centrado en la plataforma de base...
Página 11
Cambridge Fully Assembled Outdoor Veneer Grill Island Fully Assembled Grill Granite Countertop Installation: 1. Once the grill unit has been set it is time to install the counter tops. There are 3 pieces in the kit. 2. Uncrate the granite and set the slabs carefully on top of the grill module wall block base. Use retain- ing wall adhesive to glue the counter tops down to the base.
Página 12
Cambridge Fully Assembled Outdoor Veneer Grill Island Fully Assembled Outdoor Grill: Step 3 Piece #1 Piece #2 Piece #3 Piece #2 Piece #1 Piece #3 Paso 3: Step 3: Saca el granito y cuidadosamente instalar las 3 pie- Uncrate the granite and carefully install the 3 zas arriba de la unidad parrilla.
Página 14
Cambridge Fully Assembled Outdoor Veneer Grill Island Fully Assembled Outdoor Grill: Step 3 Paso 3: Step 3: Cuidadosamente levante la parrilla y colocar en la Carefully lift the grill and place in the opening in apertura en el granito. the granite.
Página 15
Outdoor Veneer Grill Island Cambridge Appliance Installation: Instalación de la aplicación de Cambridge: 38” Coyote Grill: Take grill out of box. Using 2 people, carefully lift the unit and place it in the 38 ¼” opening on the granite countertop. Un-tie cord for grill lights and plug transformer into 120v GFI outlet.
Página 16
Cambridge Fully Assembled Outdoor Veneer Grill Island Stainless Steel Double Door : Slide doors up and out of the hinges. Fit the door frame in opening of wall block under the grill. Once the door is centered, mark holes through the door frame onto the wall block with a permanent marker.