Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

2.95"x2.95"
75x75mm
3.94"x3.94"
10" - 27"
100x100mm
PART
ITEM
A
4x12mm
B
5X12mm
C
6x12mm
D
6x10mm
F
¢6.5x¢13X1.8
G
4x4mm
H
5x5mm
1
Bottom support 1
2
Screw
3
Washer
Product support and parts: 1-800-733-4000
Monitor Arm
Important:
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
● The desk or mounting surface must be capable of supporting the combined weight
● Safety gear and proper tools must be used. A minimum of two people are required
● Please check joint parts every two months, making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the
mount will support the combined load of the equipment and hardware. Never exceed
the maximum load capacity 6.5 KG/ 14.33 lbs, or else it may result in product failure
or personal injury.
Note: this product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury.
1.5-5kg
85
3.31-11.05lbs
QTY.
4
4
3
2
8
1
1
1
1
1
07-016/1
installation. If you are unsure of any part of this installation, please contact a
professional installer for assistance.
of the mount and the display, otherwise the structure must be reinforced.
for this installation. Failure to use safety gear can result in property damage,
serious injury or death.
PART
4
Butterfly knob
5
Bottom support 2
6
Knob
7
Cable cover 1
8
Nylon ties
9
Anti-slip rubber 1
10
Anti-slip rubber 2
11
Anti-slip rubber 3
12
Cable cover 2
One Parkway North, Deerfield, IL 60015 © 2016 Essendant Co.
ALE-AEMA1L
ITEM
QTY.
1
1
1
1
6
4
1
2
1
Manufactured for Alera
/ Essendant Co.
®
Made in China
loading

Resumen de contenidos para Alera ALE-AEMA1L

  • Página 1 Anti-slip rubber 2 5x5mm Anti-slip rubber 3 Bottom support 1 Cable cover 2 Screw Washer Product support and parts: 1-800-733-4000 Manufactured for Alera / Essendant Co. 07-016/1 ® One Parkway North, Deerfield, IL 60015 © 2016 Essendant Co. Made in China...
  • Página 2 ALE-AEMA1L 2.95”x2.95” 3.94”x3.94” 75x75mm 100x100mm Before installing monitor Make sure there are VESA holes 3.94”x3.94”/ 100x100mm or 2.95”x2.95”/ 75x75mm in the monitor. If not, the mount couldn’t be installed. Desk Tighten 0.79”-3.94”/ 20-100mm Desk Desk Size of the hole: Tighten 0.33”-2.76”...
  • Página 3: Brazo De Control

    5x5mm Goma antideslizante 3 Soporte inferior 1 Protector de cable 2 Tornillo Arandela Ayuda del producto y partes: 1-800-733-4000 Hecho para Alera / Essendant Co. 07-016/1 ® One Parkway North, Deerfield, IL 60015 © 2016 Essendant Co. Hecho en China...
  • Página 4 ALE-AEMA1L Antes de instalar el monitor Asegúrese que los orificios VESA sean de 100x100 mm o 75x75 mm, en el monitor. De lo contrario no se podrá realizar la instalación. Mesa Apretar Para mesas con un espesor: 20-100 mm Seleccione los ori cios correctos que se adapten mejor al espesor de la mesa Opción 1: con la abrazadera...
  • Página 5: Bras De Moniteur

    1 Caoutchouc 5x5mm anti-dérapant 2 Caoutchouc Appui inférieur 1 anti-dérapant 3 Cache-câble 2 Rondelle Support technique et pieces: 1-800-733-4000 Hecho para Alera / Essendant Co. 07-016/1 ® One Parkway North, Deerfield, IL 60015 © 2016 Essendant Co. Fabriqué en China...
  • Página 6: Utilisation Du Cordon

    ALE-AEMA1L 2.95”x2.95” 3.94”x3.94” 75x75mm 100x100mm Avant d'installer le moniteur Assurez-vous que il y a des trous VESA 100x100mm ou 75x75mm sur le moniteur. Sinon, la monture n'a pas pu être installée. Bureau Serrer Pour une épaisseur de table: 0.79”-3.94”/ 20-100mm Sélectionner des bons trous en fonction de l'épaisseur...