MoJack XT Instrucciones Para Asamblea Y De La Operación página 9

Operating Instructions
STEP 15
Lowering the Mower
• Remove wheel chocks.
• Release the parking brake.
• Mower must be in neutral.
• Pull and hold the Carrier Locking Pin
out and turn the Crank Handle
counter clockwise until
Wheel Pads are firmly on
the ground. The Carrier
Locking Pin must be pulled
out until it clears the bottom
Safety Hole.
STEP 16
Removing the Mower from the MoJack XT
• Remove the Safety Straps from front mower tires.
• Removing Support Rods is optional during this step.
• Drive or roll the mower off of the Wheel Pads.
Preparing the MoJack XT for Storage (Steps 17 - 20)
STEP 17
Removing the Wheel Pads
• Remove Wheel Pad Push Pins
and pull Wheel Pads out from
the Lift Arm Inserts.
• Store the Push Pins in the
Wheel Pads.
MoJack XT Lift
Carrier
Locking
Pin
Safety Holes
Pull Out
to Unlock
and Lower
Safety Hole
Push Pin
Lift Arm Insert
Wheel Pad
16
Operating Instructions
STEP 18
Removing LIft Arm Inserts
• Remove Lift Arm Push Pins and pull
Lift Arm Inserts from the Lift Arm.
• Store the Push Pins in the Lift Arm.
STEP 19
Unhooking the Lift Arm
• Remove Small Hair Pin
and Clevis Pin from Lift Arm.
• Unhook the Lift Arm from
the Carrier.
• Store the Small Hair Pin
and Clevis Pin in the
Lift Arm.
STEP 20
Raise Carrier
• Raise the Carrier by turning the
Crank Handle clockwise until
the Carrier Locking Pin drops
into the safety hole.
MoJack XT Lift
Lift Arm
Push Pin
Push Pin
Lift Arm Insert
Small Hair Pin
Lift Arm
Clevis Pin
Safety Hole
17
Lift Arm Insert
Carrier
Carrier
Locking
Pin